REGISTER NOW for the 2013 U.S. Open Sporting Clays Championships! (Click on Image Above for registration)
Our Sporting Clays chokes were designed to give you a nice dense pattern with fewer holes in the pattern where birds can be missed. All of our chokes are ported away from the shooter so there will be no powder residue blasting back at you. The porting is designed to strip the wad from the shot column, it will also keep the muzzle jump down to gain quicker response on the following shots.
Since our chokes are longer (1.75 past the muzzle) than your normal aftermarket choke tube, our chokes generally shoot one choke tighter than our competitors. Why? Because we have a longer forcing cone with a flatter taper angle. This helps reduce the pellet deformation, which causes “flyers”. So generally speaking, if you like to shoot an IC, you can back up 1 choke size with the Pure Gold and see about the same performance, give or take a few pellets. We have customers repeatedly say, “WOW, my current choke don’t come close to hitting targets like that!”
As with all Pure Gold Chokes, if you are not completely satisfied with the way the choke performs or handles in your gun, we will buy them back.
Introducing the ALL NEW Ultra Series Chokes from Pure Gold. For those that are looking for a NON-PORTED shorter choke tube for lighter front-end weight on their over/under guns, well look no further. With the same high-end quality that you’ve come to know from Pure Gold. Ultra Series chokes have a longer than stock parallel section allowing for more consistent, truer patterns. Made from the same material as our Standard ported chokes, 17-4ph Heat-Treated Stainless Steel. Ultra Series chokes come with the same 100% satisfaction guarantee as ALL of our chokes do, if you are not completely satisfied with our chokes please call us for our return policy.
For now we are only stocking the Ultra Series for Blaser, Kreighoff and Beretta OPTIMA. More models coming soon.
Here is what we are currently stocking in 12 GA ULTRA SERIES Sporting Chokes:
Here is what we are currently stocking in 12 GA PORTED Sporting Chokes:
Beretta Optima HP (DT11, A400 Xplor, Prevail)
.740 BORE Optima
Perazzi GEN 3
Current 20 GA chokes we stock:
Current 28 GA chokes we stock:
100% 30-Day Money Back Guarantee on Pure Gold Chokes. BLOW-OUT SALE Chokes do not carry this guarantee.
Slip 2000 Choke Cleaner
Gas Piston Parts / Choke Tube Cleaner will allow you to clean these parts in 15 minutes or less.
The time consuming and labor intensive chore of cleaning your gas system parts and choke tubes is a thing of the past with our Gas Piston Parts / Choke Tube Cleaner.
Slip 2000 Gas Piston Parts / Choke Tube Cleaner was designed with your health and safety in mind. Unlike other products, this product is non-flammable, non-hazardous and it is biodegradable. Gas Piston Parts / Choke Tube Cleaner provides you with a safe effective way to clean carbon and plastic wad fouling from choke tubes and all those Semi automatic shotguns gas system parts.
Simple to use
For best results, on parts that are not cleaned on regular bases, completely submerse parts to be cleaned and allow to soak for 5 to 15 minutes. Remove parts and wipe, brush or rinse clean. It’s that easy. Depending on the frequency of cleaning or type of ammo used a second soaking may be required. You may also push a brush or mop lightly through choke tubes and watch the plastic roll out in sheets.
For larger parts that will not fit into jar, soak a nylon brush or rag in CTC, apply to area that needs to be cleaned and allow product to set for 2 to 5 minutes. When ready to clean, saturate brush or rag with CTC again and wipe or brush away carbon. Parts may also be rinsed clean under hot water.
After cleaning, always re-apply Slip 2000™ Lubricant to metal surfaces and allow to penetrate pores of metal. Slip 2000™ will form a barrier and help keep carbon, lead and plastic from sticking. Your next cleaning will take half the time.
Shotguns – Pistols – Revolvers – Black powder guns – Automatic weapons
May be used in chambers and barrels as a bore cleaner. Apply to cylinder faces, bolt faces and any other hard to clean areas and allow to soak for 2 to 10 minutes. Carbon, lead, copper and burnt powder will wipe clean with a nylon brush. Next cleaning will be much easier with Slip 2000™ Lubricant/Cleaner. Users will actually be able to wipe carbon and plastic wad fouling away.
For best results, on parts that are not cleaned on regular bases, completely submerse parts to be cleaned and allow to soak for 5 to 15 minutes. Remove parts and wipe, brush or rinse clean.
Gas Piston parts / Choke Tube Cleaner removes all oil protection from the metal. Make sure parts are completely covered in product if long term soaking is required. Depending on metal composition makeup, larger parts that are left partially above water surface and exposed to the air may rust.
Item #: PG60080
Slip 2000 – 725 Gun Cleaner Degreaser
725 Gun Cleaner should truly be called Super Degreaser judging from the way it out-performs competitive products. This cleaner will cut through the toughest cosmoline, carbon, grease and grime! Its super strength allows it to degum and degunk the dirtiest of gun parts when sprayed on or used in parts washers or solvent tanks!
Inhibited to help protect sensitive metals, 725 Gun Cleaner has been thoroughly tested in the field by shooters and gun smiths and has come through with flying colors! Hands-on Gunsmiths and Armors praise how quickly it dissolves in warm water, how well it works in both hard and soft water, how freely it rinses to leave parts bare-metal bright, how long it lasts for savings in product upkeep and disposal cost reduction.
In just a few minutes, 725 Gun Cleaner / Degreaser will strip tenacious carbon stains and simultaneously, crack open and crumble heavily encrusted deposits of carbon, grease, grime, gum and gunk on aluminum, magnesium, stainless steel and other metal gun parts. Included are trigger assemblies, bolts, actions, slide rails, gas pistons and all other components. Works exceptionally well on M1 – M16 – AR15 – 9 mm – 40 caliber weapons, Black Power breach plugs and all other fully automatic weapons.
725 Gun Cleaner / Degreaser can be used in or with parts washers, ultrasonic cleaning systems and foaming brushes, portable foamers, diesel foamers, air operated foamers and many other foam generating cleaning dispensers.
Features & Benefits
- Water based avoids environmental and health safety issues
- Non-Caustic helps eliminate caustic burns and fumes
- Non-petroleum helps eliminates fire hazard and disposal problems
725 Gun Cleaner / Degreaser is a biodegradable, non-solvent solution non-flammable water based product. This product contains quality surfactants, wetting agents, emulsifiers, cleaners and rust inhibitors. Rinses freely and is compatible with most oil water separators.
To help prevent rusting, users must apply a Slip 2000 Gun Lubricant immediately after cleaning to disperse any moisture in parts.
SUGGESTED OPERATION CONDITIONS
As a Cleaner
- Used in Parts washers, vibratory or ultra sonic devices and spray bottles
- Dilution rate – Ready to use
- Temperature range – Ambient / Room temperature to 180°F (up to 71°C)
- Dwell time – 10 to 60 seconds, or longer if necessary
- Rinse evenly and apply a Slip 2000 Gun Lubricant
For best results:
For heavier soils and deposit buildup, higher concentrations may need to be used. Using product at higher temperatures (160° – 200°) may speed soil release up and allow less soak time.
Item #: PG60212
Slip 2000 Gun Oil
Slip 2000™ Gun Lubricant
CLEANER, LUBRICANT AND PRESERVATIVE FOR USE ON WEAPONS AND WEAPONS SYSTEMS
Slip 2000™ Gun Lubricant is used by hunters, recreational and competition shooters as well as Local, State and Federal Law Enforcement Agencies world wide. This product has also been requested and shipped to the U.S. Military Forces in Iraq for the last 18 months because it has out preformed the current MIL SPEC products.
Slip 2000™ Lubricant is formulated to meet the complete requirements of cleaning, lubricating, and preserving both small and large caliber weapons in virtually all climate conditions.
Item #: PG60001
Pure Gold Choke Cases
Pure Gold CT6 carrying case will hold 6 of your favorite Pure Gold Chokes in these gun models and gages.
Ber/Ben Mobil Choke (12/20/28), Blaser, Kolar (.740/.750), Krieghoff, Zoli, Caesar Guerini FAB-ARM Style, Winchoke (12/20/28), Perazzi, Remchoke (12/20/28), Caesar Guerini 28ga., Remington PRO-BORE.
FREE when you purchase 3 or more chokes.
Retail: $6.50 pc
Pure Gold CT9 carrying case will hold 3 of the LONGER style Pure Gold Chokes like; Optima, Optima +, Optima HP, CRIO, CRIO +, Invector +, Caesar Guerini MAXIS, CRIO + 20ga.
CT9 will also hold up to 6 of the OTHER style Pure Gold Chokes too like above in the CT6.
FREE when you purchase 3 or more chokes.
Retail: $7.50 pc
Pure Gold Soft Case
Our soft case will hold 5 chokes vertically in a separate divider protecting each choke from rubbing against each other. Front elastic closure for quick opening and closing. Easily attaches to your belt.
Retail: $24.95 pc
We have come up with a few after-market parts for the Beretta Semi-Auto Shotguns. Designed for AL 390/AL 391 12 & 20 GA guns. Our parts are hand machined for long lasting durability. If you are looking for after-market replacement parts then we can help. All parts come with very detailed installation instructions for the “Do it yourself” job. Very easy to install and requires no level of gunsmithing knowledge to install.
Few Sporting Clays Champions have accomplished as much in a lifetime as Anthony Matarese Jr. has in little more than a dozen years.
Recognized as one of the top competitors in the U.S. and the world, Anthony has earned his way onto 12 All-American teams in 13 years of competing. His list of accomplishments is long, impressive and still growing.
Initially coached by the legendary Dan Carlisle, Anthony has developed his own unique style, which he calls a “Dynamic” approach to Sporting Clays, that he teaches to his students. Many have gone on to achieve remarkable successes on their own.
Anthony reasoned that there may be a better method than a “do all” approach given the complexity and diversity that has come to define modern Sporting Clays, and instead developed a base technique with a few core principles that can be tailored to allow the shooter to engage a presentation in multiple ways depending on whether it is the first bird of a pair, the second, or a single as in F.I.T.A.S.C. Sporting.
Anthony’s dedication to the game and his passion to pass what he has learned to other shooters is evident in this video. He has become one of the new young leaders in the shooting world and his experience will make you a better shooter.
Buy Anthony’s video today!
Dan Carlisle – Olympic medal winner, World Champion, 13 time National Champion and the most successful shooting coach in the US. You’ll find specific analysis as to what to look at when you see a particular presentation and how to develop a plan that will allow you to successfully execute each move on a wide variety of targets. Achieving success in sporting clays is all about hitting presentations time after time – and by applying Dan’s techniques for consistent execution and practicing them, you will find yourself shooting your best scores ever and having more fun too! Included is extensive classroom teaching about the theory of developing a technique that ensures that consistency – very different to the average coaching DVD.
Copyright © 2011 Game Accessories – All images on site are property of Game Accessories and others used with permission. Any questions or concerns about the site please contact us mailto:firstname.lastname@example.org Website built & maintained by Game Accessories 2011